Ceramic Magnets Polarity Options
|
Single opposite poles on each face
|
Multiple poles on one face  |
General Information
Tolerances: As sintered size
Dimensions at right angles to direction of pressing:
Tolerance: ± 1-1/2% or ± .010", whichever is greater.
Dimensions parallel to direction of pressing:
| Dimensions | Tolerances |
| 0 - 5/8" | ± 1/64" |
| Over 5/8" to 1-1/2" | ± 1/32" |
Finished Sizes (f):
Finished (f) Surface Roughness: 125 microinches
| Dimension | Tolerance |
| Any plane ground | ± .005" |
| Centered or centerless ground 0-1.5" | ± .002" |
| Centered or centerless ground over 1.5" | ± .005" |
Squareness:
Between 2 unfinished surfaces: 90° ± 1°
Between 1 finished (f) and 1 unfinished surface: 90° ± 1°
Between 2 finished surfaces: 90° ± 30'
Parallelism of Finshed (f) Parallel Surfaces:
Surfaces to be parallel to within one half the total tolerance on the dimension between the surfaces.
Concentricity Between Inside and Outside Surfaces Unfinished Surfaces:
Within 1-1/2% of nominal wall thickness F.I.R., or .010" F.I.R., whichever is greater.
Warp:
Maximum allowable warp - .011" per inch of length.