Magnetic Head Pulley
Magnetic Separator Pulley
Technical Data Sheet and RFQ Form
Magnetic Separator Pulleys are ideally used as head pulleys in belt conveyors for continuous and automatic removal of tramp metal from material flow. As the tramp metal contaminated material comes within the pulley's magnetic field, the ferrous tramp will be attracted and held to the belt until it reaches the underside. It will then pass separately out of the magnetic field and be discharged into a chute or bin. The cleaned, nonmagnetic material is discharged normally over the pulley in a vertical drop.
PS 0812A TAPPER LOCKS
PSS 1012 FIXED SHAFT
The comprehensive line of powerful permanent magnet separation pulleys meet the size and
installation requirements of most conveyor system applications. Installed as hand pulleys in conveyor systems, the permanent magnet pulleys provide effective, full time, automatic tramp metal removal.
Magnetic pulleys are provided in four different hub styles - extended hubs, flush hubs, recessed hubs, and with no hubs. Pulley shafts are removable mild steel and are available with optional stainless steel shaft. Standard pulley sizes range from 4" diameter by 10" face width to 30" diameter to 62" face width.
|
Maximum Conveyor Belt Speed (feet per minute) |
|||||||||
|
Pulley Type |
6" |
8" |
10" |
12" |
16" | 18" | 20" | 24" | 30" |
|
Ex-High Intensity |
93 |
115 |
143 |
175 |
200 | 226 | 260 | 285 | 330 |
|
High Intensity |
77 |
100 |
117 |
140 | 165 | 190 | 210 | 260 | |
Features
- 300 Stainless Steel Faces
- Removable Mild Steel Shaft
- Four Hub Styles
- Flat Face
- Keyway and Set Screws
Options
- Tapper Locks
- Crowned Face
- Fixed Shaft
- Lagging Smooth Vulcanized
- 1/4 - 3/8 - 1/2 th
