DLL Series Magnetic Lifters
DLL Series Application Notes
Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for two or more people.
Features
- Non-Marring Roller Cam Release*
- Less torque required to release part
- Lift capacity clearly stated on magnet
- No Electrical Power Required for Operation
- Durable Stainless Steel Casing
- Heat Resistant up to 300º F (148º C)
* The non-marring roller cam will easily release parts without gouging your valuable materials.
Benefits
- Eliminates the need for slings, clamps, or chains
- The risk of gouges or scarring on material is reduced
- A two person job becomes a one person job
Applications
- Handling steel items in receiving and shipping areas
- Fast stacking and unstacking of steel sheets, plates, and angles
|
Dimensions (in inches) | |||||
| Model |
Weight (lbs) |
Length | Width | Height | Handle Length |
| DLL-1382 | 12.0 | 9.875 | 3.5 | 3.1875 | 9.25 |
| DLL-1383 | 28.0 | 12.625 | 5 | 3.1875 | 9.25 |
| DLL-1384 | 42.0 | 14.4375 | 7 | 3.1875 | 20 |
| DLL-1385-B | 77.0 | 15.5 | 10 | 3.1875 | 20 |
| DLL-1386 | 105.0 | 19.625 | 10 | 3.1875 | 20 |
|
Holding Value & *Max. Sheet Length Due To Sag For Material Thickness | ||||||
| Model | 3/16" (6') | 1/4" (6') | 3/8" (8') | 1/2" (8') | 3/4" (8') | 1" (10') |
| DLL-1382 | 400 | 400 | 400 | 400 | 400 | 400 |
| DLL-1383 | 600 | 900 | 1000 | 1000 | 1000 | 1000 |
| DLL-1384 | 800 | 1000 | 1500 | 1500 | 1500 | 1500 |
| DLL-1385-B | 800 | 1064 | 1725 | 2000 | 2200 | 2200 |
| DLL-1386 | 800 | 1100 | 1800 | 2700 | 3000 | 3000 |
NOTE: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift and the load need to be clean & free of chips, oil, slag, dirt, etc. Lifts must be centered on the load. Not recommended for painted or finish coated surfaces. We recommend when lifting sheets over 8’ long that you use 2 or more lifts.
*Maximum sheet lengths are selected due to the sag characteristics of the specified sheet.