High-Temperature Magnet Assemblies

High-Temperature Racking Assemblies

Resists Demagnetization to 800°, commonly used as Paint Rack Magnets.

Bright Zinc Plated 11 gauge steel poles

High-Temperature Racking Magnet Assemblies
Model	Length	Width	Height	Weight	Power
DFL-200	3″	11/16"	1-1/8″	.34 lbs	50 lbs
DFL-300	3"	1″	1-1/8″	.44 lbs	60 lbs
*Holding force determined under ideal conditions, safety dictates a workload 1/2-1/3 of maximum.

High-Temperature Alnico Pot Magnet Assemblies
Dura Magnetics P/N	Diameter	Length	Tap	Force (lbs)*
DMH-650	3/8"	1/2"	8-32	1.55 lbs
DMH-10	1/2"	1/2"	10-32	2.50 lbs
DMH-12	1/2"	3/4"	10-32	3.00 lbs
DMH-14	1/2"	1.00"	10-32	3.50 lbs
DMH-20	5/8"	1/2"	10-32	2.75 lbs
DMH-22	5/8"	3/4"	10-32	4.25 lbs
DMH-24	5/8"	1.00"	10-32	4.80 lbs
DMH-30	3/4"	1/2"	10-32	5.25 lbs
DMH-32	3/4"	3/4"	10-32	9.15 lbs
DMH-34	3/4"	1.00"	10-32	9.45 lbs
DMH-36	3/4"	1-1/4"	10-32	10.00 lbs
DMH-50	1.00"	1/2"	1/4-20	7.25 lbs
DMH-52	1.00"	3/4"	1/4-20	15.50 lbs
DMH-54	1.00"	1.00"	1/4-20	17.00 lbs
DMH-56	1.00"	1-1/4"	1/4-20	19.00 lbs
DMH-62	1-1/4"	3/4"	1/4-20	17.50 lbs
DMH-64	1-1/4"	1.00"	1/4-20	21.00 lbs
DMH-66	1-1/4"	1-1/4"	1/4-20	25.00 lbs
DMH-68	1-1/4"	1-1/2"	1/4-20	27.00 lbs
*This value is the recommended maximum holding power. Higher levels may be achieved, but are not advertised.

High-Temperature Brass-Sleeved Alnico Magnet Assemblies
Part Number	Diameter ±0.001	Length ±0.005	Magnet Diameter	Holding Force
DBS-1250	0.125″	0.500″	0.093″	3.2 oz
DBS-12100	0.125″	1.000″	0.093″	5.0 oz
DBS-1850	0.1875″	0.500″	0.157″	4.5 oz
DBS-18100	0.1875″	1.000″	0.157″	13 oz
DBS-2537	0.250″	0.375″	0.187″	3.8 oz
DBS-2550	0.250″	0.500″	0.187″	5.5 oz
DBS-25100	0.250″	1.000″	0.187″	17 oz
DBS-3150	0.3125″	0.500″	0.250″	8.9 oz
DBS-31100	0.3125″	1.000″	0.250″	15 oz
DBS-3737	0.375″	0.375″	0.312″	4.6 oz
DBS-3750	0.375″	0.500″	0.312″	8.5 oz
DBS-37100	0.375″	1.000″	0.312″	18 oz
DBS-4350	0.4375″	0.500″	0.375″	9.1 oz
DBS-5050	0.500″	0.500″	0.437″	10.8 oz
DBS-50100	0.500″	1.000″	0.437″	26.7 oz
DBS-6250	0.625″	0.500″	0.500″	7.8 oz